Paillard Bolex P2 Zoom Reflex Movie Camera With Som Berthiot Pan-cinor Lens

Shop with confidence, we are a Central London based UK store. Paillard Bolex P2 Zoom Reflex Movie Camera with Som Berthiot Pan-Cinor Lens.

Note: There is fungus in the lens. Otherwise, the item is in a good and fully working condition. Overall Dimensions: With grip, 9" x 8 1/2" x 2. Outer Case: Highly polished duraluminium body, covered in genuine Morocco leather. Film Capacity: 25ft daylight loading spools of double run 8mm film. When a roll runs through the camera, only half the width of film is exposed.

The spool is then reversed and run through again, exposing the other half. When processed, film is split and spliced together giving 50' for projection. Projection time at 16 fps for 25' roll is 4 minutes. Threading: manual, with no loop forming; with the pressure pad opened the film is simply placed over a guide roller, threaded behind the gate, over the bottom guide roller and onto the takeup spool.

Motor: Constant speed, spring motor mechanism; governor controlled. Generous winding key, attached to the camera, folds back against its side when not in use. Zoom Lens: SOM Berthiot Pan Cinor 9-30mm f/1.9 zoom lens. Viewfinder: Reflex viewfinder with adjustable diopter for eyesight correction; Rubber eyecup. Variable Speed: 12, 16, 18, 24, 32, 48 and 64 frames per second.

Release Button: continuous exposures can be made by a finger tip release button or cable release. Running operation can be locked to prevent accidental exposures. Tightening the cable release screw allows for hands-free filming.

Variable Shutter: Adjustable dial changes the shutter opening from 0-165 degrees to allow for shortened exposure times and fades. Footage Counter: Precise reading of exposed film footage.

Resets to zero upon reloading. Single Frame: A cable release socket allows the user to expose single frames for filming animation, titles, etc. Manual Rewind: A small hand crank allows for rewinding film up to 60 frames.

Exposure Meter: A battery powered (Mallory RM450) cadmium sulfide photo-resistive cell measures light through the lens. A film speed sensitivity dial (10-400 ASA) is then set and a needle indicator in the viewfinder is centered by adjusting the lens diaphragm, resulting in correct exposure. Tripod Socket: 1/4 thread; fits accessory Declic D trigger handle grip. This means you can feel safe and confident with placing your order with us. International deliveries can take 3-12 days depending upon your location. Return posting costs will be at your expense. The item must be in its original condition for a return to be accepted. When returning an item back to us, please provide the following information to help us process your return as quickly as possible.